For thin conductive materials such as TCOs, silicon wafers, foils, and more. Our bestselling 20J3 sensor has a 20 cm reach and 3 mm gap.
For thick conductive materials or conductive coatings on a thick substrate. The 30C9 sensor has a 30 cm reach and 9 mm gap.
For thin conductive layers on thick or curved substrates. The S3 sensor is the smallest, simplest, and most affordable high-precision noncontact sheet resistance meter available.
Enclosed sensor frame with user-defined number of sensor positions. Ideal for applications with high cross-web consistency requirements. Monitor and record remotely with included Ethernet and PC-based software.
The large gap configuration of Delcom's multisensor system is ideal for measuring glass and other thick products. This system is highly customizable, with various options for gap height and sensor positions.
The most flexible and affordable way to monitor sheet resistance in real time cross-web or down-web. Monitor and record remotely with included Ethernet and PC-based software.
Monitor sheet resistance inline without making contact. Ideal for glass applications. Monitor and record remotely with included Ethernet and PC-based software.
Disassembled sensor halves and electronics box, for highly customizable mounting options.
Rolling two or four point probe. Roller width and diameter—as well as ring number, spacing, and elevation—are specified by the customer. Monitor and record remotely with included Ethernet and PC-based software.
Extremely useful for positioning material precisely and consistently inside the 20J3 sensor gap. The white Delrin surface can be marked with a user-defined grid and then easily cleaned, if necessary.
Extremely useful for positioning material on top of the S3 sensor. The white Delrin surface can be marked with a user-defined grid and then easily cleaned, if necessary.
Allows the user to measure materials smaller than the spatial resolution of the 20J3 sensor.
Make and record readings up to 100 times faster! Delcom's powerful software has many useful features, allowing users to set pass/fail thresholds, monitor multiple sensors at once, save data for further analysis, and more.
Integrate Delcom sensors into your PLC or other process control systems. A Delcom meter operates as a TCP/IP web server.
Delcom can source a tablet or laptop for benchtop applications or an industrial PC for inspection stations and inline monitoring.
With a few simple but vital components (such as cabling, brackets, and feedthroughs), any of Delcom's sensors can be made vacuum ready.